Recent content by spectra

That is not an abrasive chop saw. It has a blade with teeth on it but like it was said before they cut nice for a few cuts then go away. I used one for a while and did not like it. I would save some coin and then buy a decent band saw. Just remember to think about what you want to cut and...

Here is one not sure what year the toy is.http://rcrc4x4.com/mambo/index.php?option=com_content&task=view&id=26&Itemid=2#Wiring

When I went to put my 42s on the 8 bolt hummer wheels they were not going to fit. Searched around and found a few other people with the same problem. I could not even get the lock started with 2 bolts had to tighten one just to get another one on.

I just bought a set and am in the process of mounting them and found out that the stock runflats will not work with the Iroks. The beads are to thick and the runflats need to be cut down. So I ordered the pvc ones from CJdean also have his rebar rings. All I can say is he is a great guy to deal...

Yes make a angle frame for it. I have a fab shop and all tables are 3/4 plate with 4x4 1/4 angle frames. After a while these even warp and bend. The 3/8 plate will bend if hit on enough so try to support it with something if you can not get any angle. The good thing about the angle is if you...

Angle Iron. Either use some 4x4 or if you want to go under the tub more go with a 4x6 or bigger. I have 1/4 inch on mine and have beat the tar out of them.

Tried to go into the local store in Portland and they said NO WAY! They ran out of straps and will not back order any. :mad: