UNSTUCK
But stuck more often.
I'm ready to part this out, well at least sell the crawler parts I have. I wont tear the jeep apart yet though. You can still buy everything I have for $10K.
1970 commando body. VERY good shape, but horrible paint job by the PO.($3000) SOLD
4 speed atlas 2.0 gears, cable shifters, driver drop. 99% sure it was in a TJ. First gen, so it's old, but looks good. I have not run it. ($1400) SOLD
2-3 big plastic totes full of random original parts and some aftermarket parts, mostly junk. (included with jeep)
Dana 60 rear axle. Semi-float. 4.88, detroit, cromo 35 spline shafts. 5 on 5.5 Used ($600) SOLD
Dana 44 front pass drop 1/2 ton. 4.88, detroit, cromo shafts, flat top knuckles used.($600) SOLD
Dana 44 front driver drop, 3/4 ton. stock, used.($300) SOLD
Stock dana 44 and 27 (?) axles.($100)
Ried knuckles, and all parts to make the ford axle 5 on 5.5. I was going to take the chevy parts and make a good driver drop axle. ($500) SOLD
14" ORI struts with reservoirs. Perfect for the go fast stuff. used. ($1400) SOLD
Corbeau baja seats. (2) perfect shape, but used a few trips.($150 each) SOLD
LJ frame to replace the stock frame. In near perfect shape.($700) SOLD
LJ fuel tank with sender(150)
Warn fuel tank skid, used ($100)
TJ hood in good shape, but a crazy paint job.(150) SOLD
TJ grill in great shape.($150) SOLD
(4) brand new Monster beadlocks. flat back with polished ring ($1200) SOLD
(4) brand new Yoki MT tires 37"(1000) SOLD
T&T Hyline front fenders. Powder coated black. good shape, notched for coilover on the inner fender. ($200) SOLD
Lots of small parts, TJ steering gear box, trans cooler, TJ M/C, ($200)
4-5 tubes of 1.75 DOM tube. All have surface rust on them. ($150) SOLD
$10k for everything now includes the atlas 4 speed I have.
Well life happens I guess. I'm spending a lot more time at work now (was moved from salary to hourly = overtime!!!) and would really just like to buy something done. So here is my list of parts. I do not need to sell any of this. If none of it sales I'll just continue with the build. Before I start parting this out, I'd like to try to sell it whole. The prices will go up once I do part it out, so this will be a smoking deal for whoever takes on this project. I'll let the pictures of what I have do most of the talking. I have been gathering up the parts for several months now.
The jeep by itself is in pretty good shape. VERY little rust. Engine runs great. 5.3L, 4L60E, Dana 20, Winters shifter. It would not take much to make this a decent driver as it sits right now. Paint needs to be redone, needs exhaust, and interior. Shocks need to be installed, ect. If you are interested in just the jeep as it sits, I can go over with you what it would need to be finished. I will sell the Jeep as it sits for $5000.00. I will sell every extra part I have as seen in the pictures below for an extra $5000. This includes the related parts on my other current "parts for sale" thread.
I would be interested in trading for a ready to go TJ of equal value. Also looking for trades on adventure style motorcycles and one or two 50cc dirt bikes, and maybe something like a TTR for my wife to learn on.
Let me know if you have any questions or would like to see it.
I saw this picture and really liked it. I was going for something similar with the TJ front end, but much lower with a link suspension.
1970 commando body. VERY good shape, but horrible paint job by the PO.($3000) SOLD
4 speed atlas 2.0 gears, cable shifters, driver drop. 99% sure it was in a TJ. First gen, so it's old, but looks good. I have not run it. ($1400) SOLD
2-3 big plastic totes full of random original parts and some aftermarket parts, mostly junk. (included with jeep)
Dana 60 rear axle. Semi-float. 4.88, detroit, cromo 35 spline shafts. 5 on 5.5 Used ($600) SOLD
Dana 44 front pass drop 1/2 ton. 4.88, detroit, cromo shafts, flat top knuckles used.($600) SOLD
Dana 44 front driver drop, 3/4 ton. stock, used.($300) SOLD
Stock dana 44 and 27 (?) axles.($100)
Ried knuckles, and all parts to make the ford axle 5 on 5.5. I was going to take the chevy parts and make a good driver drop axle. ($500) SOLD
14" ORI struts with reservoirs. Perfect for the go fast stuff. used. ($1400) SOLD
Corbeau baja seats. (2) perfect shape, but used a few trips.($150 each) SOLD
LJ frame to replace the stock frame. In near perfect shape.($700) SOLD
LJ fuel tank with sender(150)
Warn fuel tank skid, used ($100)
TJ hood in good shape, but a crazy paint job.(150) SOLD
TJ grill in great shape.($150) SOLD
(4) brand new Monster beadlocks. flat back with polished ring ($1200) SOLD
(4) brand new Yoki MT tires 37"(1000) SOLD
T&T Hyline front fenders. Powder coated black. good shape, notched for coilover on the inner fender. ($200) SOLD
Lots of small parts, TJ steering gear box, trans cooler, TJ M/C, ($200)
4-5 tubes of 1.75 DOM tube. All have surface rust on them. ($150) SOLD
$10k for everything now includes the atlas 4 speed I have.
Well life happens I guess. I'm spending a lot more time at work now (was moved from salary to hourly = overtime!!!) and would really just like to buy something done. So here is my list of parts. I do not need to sell any of this. If none of it sales I'll just continue with the build. Before I start parting this out, I'd like to try to sell it whole. The prices will go up once I do part it out, so this will be a smoking deal for whoever takes on this project. I'll let the pictures of what I have do most of the talking. I have been gathering up the parts for several months now.
The jeep by itself is in pretty good shape. VERY little rust. Engine runs great. 5.3L, 4L60E, Dana 20, Winters shifter. It would not take much to make this a decent driver as it sits right now. Paint needs to be redone, needs exhaust, and interior. Shocks need to be installed, ect. If you are interested in just the jeep as it sits, I can go over with you what it would need to be finished. I will sell the Jeep as it sits for $5000.00. I will sell every extra part I have as seen in the pictures below for an extra $5000. This includes the related parts on my other current "parts for sale" thread.
I would be interested in trading for a ready to go TJ of equal value. Also looking for trades on adventure style motorcycles and one or two 50cc dirt bikes, and maybe something like a TTR for my wife to learn on.
Let me know if you have any questions or would like to see it.
I saw this picture and really liked it. I was going for something similar with the TJ front end, but much lower with a link suspension.
Last edited: