- Location
- West Jordan
There are so many FREEs in the title, because I have LOT of stuff... Would love to have you come and remove these items so I can feel like less of a hoarder... 
Please call or text me to arrange pickup of parts - FIRST COME FIRST SERVED - I'd like to move this stuff ASAP. You can post up for additional info, but calling/texting is better for me (and you,) as I won't be by the compy all the time.
Call/text anytime between 8am and 11pm.
801-949-5326
-Bryson
I'll try to update as things go... Things with RED text are GONE.
Powerstroke engine cover and fuel bowl lid/gasket - came from a 99 F250:
Warn bolt-on Dana 44 diff guard:
Steering parts - TC pump with AN fitting tigged on so it can be run with a remote reservoir, factory res. for the TC pump, new Howe dual groove v-belt pulley for a Ham-can style pump:
OBS Ford front leaf springs, partial Excursion rear springs, F250, 350, Ex rear shackles (2 pair,) misc brake rotors to make tool stands or other projects?:
Old 1/4" UHMW skids from my buggy - cut them down for smaller projects?:
OBS Ford wheel center cap, Dana 80 FF 35spl axle shafts - both 39" flange to end of splines:
Stock JK rear upper control arms, Ham can style PS pump, lines and cooler, stock TJ/XJ/ZJ track bar - needs boot:
2 sets of 24valve Cummins injectors (stock,) misc Cummins intake elbow, IC boots, used kit to add a 2nd factory lift pump to a 24valve Cummins (in the bucket,) TJ/XJ/ZJ steering stabilizers (2,) misc u-bolts and plates, hitch with 2" ball - fits the smaller receiver size, Suzuki motorcycle clutch cable (new in package,) Toyota 8" mini-truck spider gears in great shape:
Auto brake pedal from an XJ (I think,) hydro ram (<5" travel,) stock 24valve Cummins airbox, 32spl T-case yoke and d-shaft adapter, stock ZJ pitman arm (1" more drop than a stock XJ arm):
GM truck? fan shroud, ProComp TJ lower control arms - need bushings and sleeves:
98-02 Dodge truck dash bezel, Art Carr/Winters shifter bezel, AWESOME crawdad trap:
Stock TJ rear shaft with 1 new joint - it's tight, but a good spare, truck-lite lights, Ford radius arm brackets cut from a 78 HP D44:
Skis, boots, and poles:
Misc. small speakers, blue Pioneer speakers, heat exchanger (make your own hot water shower?) plastic battery box:
Toyota mini-truck/1st & 2nd gen 'runner IFS front diff - complete minus R&P:
Ford 10.25 or 10.50 rear diff cover, 01 Dodge D60 inner knuckles/C's:
Stock FJ/FZJ80 springs - 1pr front, 2pr rear:
Misc brackets for Toy 22RE, Toy trans shifters, coolant lines, pass side solid axle steering arm, engine pulleys:
Functional rowing machine:
Please call or text me to arrange pickup of parts - FIRST COME FIRST SERVED - I'd like to move this stuff ASAP. You can post up for additional info, but calling/texting is better for me (and you,) as I won't be by the compy all the time.
Call/text anytime between 8am and 11pm.
801-949-5326
-Bryson
I'll try to update as things go... Things with RED text are GONE.
Powerstroke engine cover and fuel bowl lid/gasket - came from a 99 F250:
Warn bolt-on Dana 44 diff guard:
Steering parts - TC pump with AN fitting tigged on so it can be run with a remote reservoir, factory res. for the TC pump, new Howe dual groove v-belt pulley for a Ham-can style pump:
OBS Ford front leaf springs, partial Excursion rear springs, F250, 350, Ex rear shackles (2 pair,) misc brake rotors to make tool stands or other projects?:
Old 1/4" UHMW skids from my buggy - cut them down for smaller projects?:
OBS Ford wheel center cap, Dana 80 FF 35spl axle shafts - both 39" flange to end of splines:
Stock JK rear upper control arms, Ham can style PS pump, lines and cooler, stock TJ/XJ/ZJ track bar - needs boot:
2 sets of 24valve Cummins injectors (stock,) misc Cummins intake elbow, IC boots, used kit to add a 2nd factory lift pump to a 24valve Cummins (in the bucket,) TJ/XJ/ZJ steering stabilizers (2,) misc u-bolts and plates, hitch with 2" ball - fits the smaller receiver size, Suzuki motorcycle clutch cable (new in package,) Toyota 8" mini-truck spider gears in great shape:
Auto brake pedal from an XJ (I think,) hydro ram (<5" travel,) stock 24valve Cummins airbox, 32spl T-case yoke and d-shaft adapter, stock ZJ pitman arm (1" more drop than a stock XJ arm):
GM truck? fan shroud, ProComp TJ lower control arms - need bushings and sleeves:
98-02 Dodge truck dash bezel, Art Carr/Winters shifter bezel, AWESOME crawdad trap:
Stock TJ rear shaft with 1 new joint - it's tight, but a good spare, truck-lite lights, Ford radius arm brackets cut from a 78 HP D44:
Skis, boots, and poles:
Misc. small speakers, blue Pioneer speakers, heat exchanger (make your own hot water shower?) plastic battery box:
Toyota mini-truck/1st & 2nd gen 'runner IFS front diff - complete minus R&P:
Ford 10.25 or 10.50 rear diff cover, 01 Dodge D60 inner knuckles/C's:
Stock FJ/FZJ80 springs - 1pr front, 2pr rear:
Misc brackets for Toy 22RE, Toy trans shifters, coolant lines, pass side solid axle steering arm, engine pulleys:
Functional rowing machine:
Last edited:
