addifan
Registered User
- Location
- Sandy, Utah
Replacing some bearinging. Has anyone done this before on a WJ? I am sure it is the same for most Jeeps. Anyway, this would be my first time doing this so it would actually be you teaching me more then helping me. Here is what needs to be done:
1. jack up front end
2. remove front tire
3. remove brake caliper (two 19mm bolts)
4. remove manual hub (allen head screws)
5. remove spindle nuts (2 of them, same as D44 nut wrench)
6. Pull off rotor and hub assembly
7. Remove bearings.
8. Install bearings and put back together.
Thanks!
Kevin
1. jack up front end
2. remove front tire
3. remove brake caliper (two 19mm bolts)
4. remove manual hub (allen head screws)
5. remove spindle nuts (2 of them, same as D44 nut wrench)
6. Pull off rotor and hub assembly
7. Remove bearings.
8. Install bearings and put back together.
Thanks!
Kevin