• RME Gear & Apparel

Ideal Shop Tool List...

BBowski82

BBowski82

What are you looking at?
Location
Haubstadt, In
Alright, I'm talking your everyday ideal shop; not a dream shop (yeah, I'd like a bridgeport too, just not practical). SO, it looks like I may be having a seperate detached 28x36' garage built on my property. It would be in addition to my attached 2 1/2 car and used strictly as a shop (no daily drivers in it).

Let's make a list of essential tools to stock the ideal garage:

-Complete set of hand tools & plenty of tool boxes/storage
-220V Welder
-Tubing Bender
-Metal bandsaw
-Plasma cutter
-Drill Press
-Reciprocating Saw
-4 1/2" angle grinder
-Bench grinder
-Press
-Sheet metal break

This is a quick list, what am I missing?:greg:
 
Hickey

Hickey

Burn-barrel enthusiast
Supporting Member
Location
Grantsville, Utah
Vise
Welding table
Sink with hot water.
Shower maybe?
Parts washer.
Some type of hoist system. I had a 3 ton chain hoist chained to a pipe that was laid across all of my rafters. I could roll the pipe about 5' for placement. It was a VERY handy tool. Unloading axles from the back of my truck, lifting bodies or even whole Jeeps.
 
BBowski82

BBowski82

What are you looking at?
Location
Haubstadt, In
Hickey said:
I had a 3 ton chain hoist chained to a pipe that was laid across all of my rafters. I could roll the pipe about 5' for placement. It was a VERY handy tool. Unloading axles from the back of my truck, lifting bodies or even whole Jeeps.
Click to expand...

good call, what's it take to make this formally happen? What type of cross beam?
 
Hickey

Hickey

Burn-barrel enthusiast
Supporting Member
Location
Grantsville, Utah
There is also a trolly or truck you can buy to use with a large I beam the you mount the hoist to. In my Next shop, which will be 24' x 33' I want to put a large beam straddling the 24' that will sit on top of the wall's top plate. Probably locate it about 8 feet inside the garage door entrance.
 
RockMonkey

RockMonkey

Suddenly Enthusiastic
I'll second Shawn's ironworker, and raise him a lathe. I will soon have some real shop space of my own, and I've been thinking about this some too. An engine lift seems like it will pretty much do anything you can do with a hoist. It just takes a little more floor/storage space. It sounds like you don't have a shortage of floor space though. Don't forget to leave room/budget for a GOOD compressor too.
 
Greg

Greg

I run a tight ship... wreck
Admin
Location
Grand Junction, CO
Don't forget a torch, I recently added one to my garage & now I wonder how I got along w/o one. Yeah, a P-Cutter will do most the same things, but for heating steel & working with it a torch can't be beat.
 
BBowski82

BBowski82

What are you looking at?
Location
Haubstadt, In
RockMonkey said:
I'll second Shawn's ironworker, and raise him a lathe. I will soon have some real shop space of my own, and I've been thinking about this some too. An engine lift seems like it will pretty much do anything you can do with a hoist. It just takes a little more floor/storage space. It sounds like you don't have a shortage of floor space though. Don't forget to leave room/budget for a GOOD compressor too.
Click to expand...

Yeah, I've got alot of the stuff I listed already...still think it's fun to put it all on paper. As for a compressor, I've got a 60 gallon 2-stage.


Out of curiosity, what's an ironworker run?
 
Hickey

Hickey

Burn-barrel enthusiast
Supporting Member
Location
Grantsville, Utah
RockMonkey said:
I'll second Shawn's ironworker, and raise him a lathe. I will soon have some real shop space of my own, and I've been thinking about this some too. An engine lift seems like it will pretty much do anything you can do with a hoist. It just takes a little more floor/storage space. It sounds like you don't have a shortage of floor space though. Don't forget to leave room/budget for a GOOD compressor too.
Click to expand...
Good call on the compressor. I don't like the engine lifts for two reasons. I am always tripping over or smacking my head into the thing, and they are not rated high enough and get tippy when the weight is up at max height.
 
RockMonkey

RockMonkey

Suddenly Enthusiastic
BBowski82 said:
Yeah, I've got alot of the stuff I listed already...still think it's fun to put it all on paper. As for a compressor, I've got a 60 gallon 2-stage.


Out of curiosity, what's an ironworker run?
Click to expand...
Plan on spending at least 3 grand, or it's probably not worth buying.
 
Shawn

Shawn

Just Hanging Out
Location
Holly Day
RockMonkey said:
I'll second Shawn's ironworker, and raise him a lathe. I will soon have some real shop space of my own, and I've been thinking about this some too. An engine lift seems like it will pretty much do anything you can do with a hoist. It just takes a little more floor/storage space. It sounds like you don't have a shortage of floor space though. Don't forget to leave room/budget for a GOOD compressor too.
Click to expand...
Ya, I'd like a lathe, but I don't have the room. I'll second the hoist. I'm using one now and it is a great tool for lifting. The one I have folds up very nicely.
 
RockMonkey

RockMonkey

Suddenly Enthusiastic
Hickey said:
Good call on the compressor. I don't like the engine lifts for two reasons. I am always tripping over or smacking my head into the thing, and they are not rated high enough and get tippy when the weight is up at max height.
Click to expand...
But they don't pull your garage down on top of you when you exceed the weight limit. :ugh:
 
Shawn

Shawn

Just Hanging Out
Location
Holly Day
Greg said:
Don't forget a torch, I recently added one to my garage & now I wonder how I got along w/o one. Yeah, a P-Cutter will do most the same things, but for heating steel & working with it a torch can't be beat.
Click to expand...
I still use my torch now and then for heating, but since the P cutter arrived, the torch collects alot of dust........;)
 
Hickey

Hickey

Burn-barrel enthusiast
Supporting Member
Location
Grantsville, Utah
RockMonkey said:
But they don't pull your garage down on top of you when you exceed the weight limit. :ugh:
Click to expand...
Never happend with mine, and I lifted quite a few heavy things with mine. Not so much as a creak outta the rafters, even when I had the front of my Jeep off the ground suspended by it. The pipe was about 1/4" wall 3" diameter and it was spread across 6 rafters.
 
You must log in or register to reply here.
Top