reddevil
'93 Cherokee
- Location
- Springville
OK, first off let me just say that I know very little and need a lot of help.
The bolts on my tie rod keep coming loose and breaking. This is the way it was set up when I bought the Cherokee. I want to say the the steering set up is Rock Krawler. To me it looks like the spacer between the joint and the knuckle touches the inside and the outside of the joint, so the outside of the joint turns the bolt. If that is the case, then were can I get new shims, or is there something else I should look at doing. The bolt that are used are 14mm.
Any help is much appreciated. Where can I get the parts I need to fix this. I bought a used bullet proof steering set up, but it doesn't use as large of links. So I think it will be better and easier to fix what I have.
Thanks, Rod
The bolts on my tie rod keep coming loose and breaking. This is the way it was set up when I bought the Cherokee. I want to say the the steering set up is Rock Krawler. To me it looks like the spacer between the joint and the knuckle touches the inside and the outside of the joint, so the outside of the joint turns the bolt. If that is the case, then were can I get new shims, or is there something else I should look at doing. The bolt that are used are 14mm.
Any help is much appreciated. Where can I get the parts I need to fix this. I bought a used bullet proof steering set up, but it doesn't use as large of links. So I think it will be better and easier to fix what I have.
Thanks, Rod