BrockSampson
Member
- Location
- West Bountiful
I'm going to be installing a thermalcoupler for my edge juice this weekend. The instructions say to drill the manifold without removing the turbo, but letting all the steel chips go through the turbo makes me nervous. What do you guys think. Should I pull the turbo or not?
If so, is there anything that I need to get from the parts store to get it it seal back up when I reinstall it.
Thanks
Bryan
If so, is there anything that I need to get from the parts store to get it it seal back up when I reinstall it.
Thanks
Bryan
Last edited: