So our project build is running full width axles dana 60 front 14 bolt rear. I am doing the XJ rear stretch going for the 6-7 inch mark, F Rear Bumper or a custom one similar. In front I am running the MORE full width kit which is a shackle reversal and also is set up for 1.5" stretch.
My biggest concern is getting to high at this point, but I want to run 38-40 tires at least.
That being said the springs I am selecting for the lift are:
Rear: Old Man EMU 2" medium duty XJ springs
front Rubicon Express 1.5" SOA Wrangler Springs
With the spring over will that be too much considering I am runn gm full width axles and doing about 9" total Stretch?
My biggest concern is getting to high at this point, but I want to run 38-40 tires at least.
That being said the springs I am selecting for the lift are:
Rear: Old Man EMU 2" medium duty XJ springs
front Rubicon Express 1.5" SOA Wrangler Springs
With the spring over will that be too much considering I am runn gm full width axles and doing about 9" total Stretch?