Search results

Set of 4, 17x9, 75 Series beadlock wheels with 5x5 bolt pattern. Wheels themselves are 9/10 condition. Bead lock rings have plenty of scuff, but are in great shape. These are my favorite wheels, but I'm moving to 8 lug. Apex valves not included. Local pickup only. Can meet you from Salt Lake...

**** SOLD **** Cusom JK44R axle fully built for TJ swap. JK44R front housing Ox 30 spline air locker Cryo treated 5.38 Ten Factory gears (50%) stronger RCV 30 spline shafts G2 axle truss G2 inner C gussets G2 LCA bracket gussets HD high clearance shock brackets Teraflex inner sleeves TNT coil...

Registration [LINK] Schedule Friday - 7:30am On-site Registration opens - 8:30am Guided Trail Runs - 3:00pm Free play & spectating at the buggy area - 5:30pm Night Trail Run Saturday - 7:30am On-site Registration opens - 8:30am Guided Trail Runs - 3:00pm Vender Booths open at Searle Pavillion...

I have a Tereflect OEM style flipped drag link, and the bulky clamps on the adjusting sleeve cause problems with my ram bracket. No matter how I position the clamps, they hit my ram mount on the track bar. 2 questions: 1- I'm wondering if anyone could tap some DOM (right handed on one end and...

I recently installed an ARB twin compressor in the LJ for tire inflation (not used for lockers). I have noticed a weak ignition/start the few times I have driven it since the installation. Then this weekend I had serious issues. I did a little off-roading, and ended up in a pickle. I had to...

Vernal - July 27 After meeting up and thenusual BS at the staging area, we finally pulled out at something like 7:40am We started the day at Doc’s Beach, which really ended up being the funnest part. To summarize my opinions of both Doc’s Beach and Red Mountain, I’ll put it this way: Doc’s...

Some of you have seen some of this on Facebook, but I thought I would give a more detailed report on here. We did the trail on July 4/5. Following some suggestions found here, and some research around the web, we decided to run the trail from the Wentworth Springs end instead of Loon Lake. We...

Stock (non-rubicon) Dana 44 axle housing from my 2004 LJ. $1500 OBO - Ox air locker - Dana 5.38 gears that have been Cryo Treated for extra strength - Yukon 4340 Chrome-Moly shafts - Artec high clearance shock brackets - Stock disc brakes with new Powerstop drilled/slotted rotors & pads - Also...

July 27th is set for July's RME trip. Friday night or Sunday activities are yet to be determined (depending on interest). Red Mountain and Moonshine arch will be the first leg of trail. After a short break, we will continue through Doc's Beach (a route through SITLA property) that will take us...

We have a group of about 9 rigs doing the Rubicon on July 4th. One of my friends had to bail because of multiple unfortunate financial hits over the past couple months. So we're hoping someone would like to take his spot, particularly with the cost of the lake house we have rented in South Lake...

Looking for OEM take-offs for cheap/free. I already scored one set, just need one more.

I'm in the market for a MIG welder. I have had the cheapest Harbor Freight welder for a while, but I immediately learned it's limits. I didn't (really still don't) know much about welders when I bought it. But at least I know enough now to know that it isn't enough of a welder for me. PS It's...

Owners Name & City- Tim Saunders - Herriman, UT Make, Model & Year of Vehicle- 2004 Jeep LJ Engine- Stock 4.0 Transmission- Stock 42RLE (auto) T-Case- Stock NP231 with Savvy cable shifter and Slip Yoke Eliminator Axles- FRONT: JK Rubicon Dana 44 with truss, sleeves, gussets, RCV's, Cryo...

I thought I would post my recent project. I have gone about this in a completely non conventional way. Most who stretch their LJ's just extend the arms, and relocate any shock mounts necessary to accommodate the stretch. There was a brief moment in time that I gave up on the idea of...

< SOLD > I'm selling a set of 4 17x9 Pro Comp Series 7069, 17x9 (4.75 BS) with 5x5 (JK) bolt pattern. They have been used and abused, but they work well, hold air and beads just fine aired up and down (I wheel at 8-9 lbs with 37's. Center caps included. You'll need to provide your own...

Has anyone upgraded to full hydro that would like to sell your ported hydro assist box for a late model TJ? I'm specifically wanting a big bore PSC box, but I know it's a long shot to find used. Just hoping to not spend $900.

I have read several of the trip reports on this Forum and other pages, and the information has been super helpful as I make plans for our group. I have several general questions, but if anyone has any ideas that I haven't thought to ask about, please feel free to share. If you think any of my...

Over the past few months a few of us have been working to establish a new trail at Sand Hollow. For those of you familiar with the area and people down there, I'll give you some background. Under the direction of Kim Pollock, the need for another 7-rated trail was needed in hopes to divert...

I thought I would post this project on here for a few reasons. I have never done anything like this (aside from swapping a HP30 in place of my stock LP30), but it is time to step up the girth of my front end. First off, I understand my build is controversial to a lot of people that will just...

Tomorrow night we are taking some of the 14-15 year old scouts in our neighborhood wheeling. We were leaning towards Little Moab since it is somewhat close, and I have been there before. I have also been wanting to go to 5-mile pass for quite some time. Maybe even the Bountiful B. Never been to...