- Location
- Never Far From Nowhere
My wife is already on this track and wants this done over the summer.
What did you work on Today; Home Edition
- Thread starter Gravy
- Start date
- Location
- Draper, UT
I can provide advice..
The_Lobbster
Well-Known Member
The wife said we need to have a shop-warming party. Sounds like my kind of party!
- Location
- Grand Junction, CO
Just say when!
- Location
- Bountiful, land of rocks
Corban_White
Well-Known Member
- Location
- Payson, AZ
Forgot to take any before pictures, but I tore down the rotted out too small lean to on the side of the garage and built a new better bigger one.
- Location
- Never Far From Nowhere
My wife wanted the garage door to be updated, since its an odd size replacing the door was prohibitively expensive. I should have gotten a before picture, but the door was just an off-white.
This was kinda a neat process. You apply a light wood colored based coat, I used "Fine Sand" with a crappy old brush with stiff bristles to leave a bit of graining effect. Then you use a gel stain over the top of it and it creates this look. I'm rather pleased with how it turned out.
This was kinda a neat process. You apply a light wood colored based coat, I used "Fine Sand" with a crappy old brush with stiff bristles to leave a bit of graining effect. Then you use a gel stain over the top of it and it creates this look. I'm rather pleased with how it turned out.
Corban_White
Well-Known Member
- Location
- Payson, AZ
Started rebuilding the front porch roof. Once again, no before pictures, but I found this old one that shows it.
Made some trusses. Over 2000 nails in 5 trusses. 😳
Removed the window, overhang and got it all closed back in. Ready for the posts and beams now.
Made some trusses. Over 2000 nails in 5 trusses. 😳
Removed the window, overhang and got it all closed back in. Ready for the posts and beams now.
- Location
- The Village of Kay
Built a quick and dirty display shelf for Race Fuel at one of our C-Stores. I'll throw another coat of paint on it tomorrow and then do final assembly and delivery on Monday.
Corban_White
Well-Known Member
- Location
- Payson, AZ
Got a few more trusses up. Realized I can't count to 6 so I will be building another truss.
- Location
- The Village of Kay
Wrapped up the assembly and paint on the race fuel display yesterday then delivered the rack and the fuel this morning.
I think it turned out ok.
I think it turned out ok.
Corban_White
Well-Known Member
- Location
- Payson, AZ
Remedied my missing truss situation and got the last 2 installed.
Corban_White
Well-Known Member
- Location
- Payson, AZ
Made good progress this weekend. Though it always seems to take longer than I think it should....
glockman
I hate Jeep trucks
- Location
- Pleasant Grove
Spent the first Rainey half of the long weekend doing Sheetrock in our basement ,(laundry room). It was almost better than standing in the rain without and umbrella, almost.
Before
After
I hate Sheetrock. I'll probably finish tape and mud in 2030.
Before
After
I hate Sheetrock. I'll probably finish tape and mud in 2030.
Pike2350
Registered User
- Location
- Salt Lake City
Let's try this again.
I spent the weekend at our cabin in Bear Lake putting up a new sign I had made from Etsy. We rent this cabin on AirBnb when we aren't using it, hence the name.
I need to add 2 more decorative angle brackets because, due to the height the T's I bought for the bottom wouldn't work out.
Apparently when you try and insert the images, the code is stuck, but it wont' show up in the edit option to delete, so the post continued to look like that.
here are the images uploaded to RME.
I spent the weekend at our cabin in Bear Lake putting up a new sign I had made from Etsy. We rent this cabin on AirBnb when we aren't using it, hence the name.
I need to add 2 more decorative angle brackets because, due to the height the T's I bought for the bottom wouldn't work out.
Apparently when you try and insert the images, the code is stuck, but it wont' show up in the edit option to delete, so the post continued to look like that.
here are the images uploaded to RME.
Last edited:
Yes, that’s the case about half the time with ol’ Pikey. We need geek squad to show him how to post pics on RME
Pike2350
Registered User
- Location
- Salt Lake City
I'm used to the old way of linking the pics from Google Photos to other forums....doing [ img ]URL[ /img ] rarely did I have issues until the last 2 years or so. I don't know if Google changed it's permission and url linking ability, or if newer forum software doesn't work with that. I just need to remember to do the "Attach file" in the forum, but then I don't like the thumbnail and not the full image in a post.