Recent content by crzyxj

I will be Coming through SLC from Wyoming this weekend with an empty trailer, Can haul anything to AZ from there for a few bucks. Will be travelling from SLC through Vegas and back to Phoenix on Sunday. Text 307-349-747Six if you have anything to be delivered.

Just linking the letter generator to other sites. Fill out the page and send letters. Easy to do and hopefully we will get enough responses to make a difference. P4x4 thread here http://www.pirate4x4.com/forum/showthread.php?t=977850 Letter generator here...

Had a good time on Flat Nasties, Too bad about the breakage Matt. Here are the pics I took of the weekend. Flat Nasties is toward the end. Hope to see you all next year! http://s59.photobucket.com/albums/g312/crzyxj/DTC%202009/?start=0 Heres a couple of wydej, got kind of snagged up on that...

here are some more from the Wind River Rally in Lander, WY Fathers day weekend. Also a couple from Pathfinder rec area Near Casper, WY Moab Widowmaker

Here is a couple pics of me at the local TTC.

Where in ontario? That looks like a place we used to go climbing outside of kingston

A lot has changed since I posted this! Comanche cab conversion, Still same old stock engine and cracked header! D60 front, 5.38's, ARB, 37" Krawlers, DIY beadlocks, 10" SAW coilovers up front, Heavily modified RK long arm, TNT bellypan, Atlas 5.0-1:D, 14B rear axle, spooled, Mostly...

We have everything from easy to hardcore. There is one area in particular that can be whatever you want. If the snow has receded enough ther is one hell of a rock garden on the mountain. we were unable to wheel it last year though. Hope some of you come up!

thanks for the interest! We have had a great last five years doing this and it just keeps growing. Let me know when you are coming up wyoming way again we will go wheeling.

Hey all, The 6th annual Wind River 4x4 Association is on schedule for June 19-21st. We invite you to come up to Lander, Wyoming to participate! This is the largest off-road event in the state! Dates: June 19th-21st. Registration on the 18th at 4-7PM Sleeping Bear Campground and RV park in...

I hope you all can come again this year!

I have those and they are "genuwhine" gears. I am still running a disco so the rear howls twice as much as the front:rofl: :rofl:

That would help. I looked at some C-clip elim. and they were not recomended for use w/disc brakes? I dont know much about ford stuff though!

What I did was found some shock mount studs like the ones that bolted to the frame on older chevys and Drilled and tapped the axle tubes. I then screwed the studs into the tube until it bottomed out. (had to cut a 1/4" off of the stud so it would not rub the inner shaft) and torqued to 60 ftlbs...

Tell me what you guys think, Will it be ok? Has anyone done any thing similar? I dont see any problems with the weld on mounts I purchased. they will bolt directly to the new mounts with the metal sleeves that came with the shocks when I bought them. I will get some extra clearance and not have...