Search results

Last year I decided I wanted a truck that I could drive to the trail head rather than having to drive the buggy with stickies. I talking about when in Moab or places like that where you have to bring the camper, or crawler hauler. The hauler was nice but then I had to drive the buggy to the...

Owners Name & City- Dave Addington, Las Vegas Make, Model & Year of Vehicle- Ford Broncoish.. Engine-Ford 408 Transmission-NP435 T-Case-NP205 with Behemoth Strongbox Axles-Built '07 Superduty axles Suspension-Front and Rear 4 links with 14" Coilovers Wheels and Tires-Custom...

Posted on the FB page, but seems like this gets more traffic. I'll be in SLC over the 4th of July weekend and I'm thinking of bringing my Bronco if a group wanted to run 5 Mile or something that Sunday. I haven't wheeled the area for 7 or 8 years, so would be fun to wheel it again!

Started a fun little project this weekend. I have a 96 F250 that I love, only thing bad about it was that it is a 2wd. So I picked up a pair of 04 SD axles to correct that! Hope to have a drivable truck again this weekend, then I have to swap the output shaft on the transmission to mate the...

Figured it's been a while since I posted here, thought I would share my rig in it's current configuration. Some of you may remember my full size Bronco, ugly brown 1978 rust bucket. I did a resto job on it then rolled it in Moab lol After that I decided to do an Early Bronco body swap Next...

Hey guys, been a while, I moved to Vegas a few years ago. Anyhow I am planning a trip to the SLC area on the 15th and would like to get together a maybe do a trail. Possibly 5 Mile or something similar, always up for a new trail if you know of any. My Bronco is quite capable, Dana 60 front and...

Pics and videos are still coming in but I have a decent group of pics to start the trip report. What a great event hosted by the Utah Bronco Club, primarily an Early Bronco club but they are fans of all Broncos. This year there were officially 6 FSB at the Safari, however Broncoair did show up...

I have 2 cases of Mobil 1 grease in tubes. I will keep a couple of them and Ryan wants a couple. So that leaves about 20 or so tubes of grease to get rid of! Send me a PM if you are interested...

So to keep the down time to minimum I am looking for a Jeep front axle for my Explorer. A Dana 30 with 4.10 gears and disc brakes would be perfect. I have the 4.10 LS Ford 8.8 in it now and really don't want to swap that out. I know these are a bit hard to find as the only rigs with them had...

1978 Ford D44 and 9" (Feeler) I am looking into picking a parts truck, it has a factory width 1978 Dana 44 and 9". To my knowledge they are stock gearing which is 3.55 and open. The ball joints are in good shape, bearings are tight, u joints should be replaced. Lug pattern is 5 on 5.5. All...

**PRICE DROP** 1994 GMC K2500 Suburban 6.5 TD "F" vin, for sale/trade So this is my 1994 GMC K2500 Suburban 6.5 TD "F" vin. It has 241,xxx miles and runs great! It has 4.10 gears, 4 wheel drive and auto trans. The interior is in very good condition and the exterior is in excellent condition. I...

I don't need much, about 12 feet is all. I thought someone may have some laying around that they are not in need of. I want to build some radius arms, so (2) 4 foot pieces and (2) 2 foot pieces, if you have any let me know! 801-680-eight five eight one.

This is the axle out of my '78 Bronco, it is in good shape and has newer bearings and inner seal upgrade. I am going to one ton axles so this is not needed. **Shocks not included** $100 OBO http://www.ksl.com/index.php?nid=218&ad=19927314&cat=594

***SOLD***

SOLD!

So question for you guys, is a Suburban too big to be a capable expo rig? I picked up a super clean '94 6.5 Turbo Diesel for a daily driver and for trips, light pulling (when I build a rig that is) and I am thinking it could be a sweet rig. I am thinking a small lift and BF Goodrich A/T tires...

This is a new project I have started to combine a rolled 1999 F-350 Powerstroke and a 1979 Ford Bronco I am hoping to have this completed in May, we shall see!

I am looking to buy a MIG welder for my upcoming project. I thought I would post up here before buying a new one! If anyone has one they aren't using let me know!

So this is a bit odd, but I have a body and frame for a 1979 Bronco coming next weekend and I am curious if anyone in the Salt Lake area has some space to store it for 3-4 weeks. I am considering renting a storage unit for it, but I would rather pay that money to someone on here than a storage...

Does anyone have some free time and a welder that would be willing to give me a hand replacing my rear quarters? I would like to do them in the next week or two if possible:greg: I am definitely willing to throw in some $$$ or whatever!