General Tech Cory's single seat selfish buggy

[_Auzzy_]

I can't wait to see this!

 

[YROC FAB.]

Ive been doing a bunch of little stuff while i wait on a mountain of parts i ordered.

I got the rear end completely finished with seals, and flipped the intake on the motor and routed a where i wanted it.


Facing the diff covers with my high dollar surface grinder.





They Jewed me out of a sweet sticker to show off my blinging shaft. Im not to happy about it.



Im going to clear the diff covers and paint the axles black


4"

 

[crosbike]

Running out of space awfully fast. Where is the fuel filler hose going meow?

 

[YROC FAB.]

Running out of space awfully fast. Where is the fuel filler hose going meow?

I have no idea. Its just metal.


Im going to run the stock p pump. I bought and installed a new reservoir for it. (Notice the factory shit grinding marks all over)



I made a new idler wheel bracket for the serpetine system to give me more wrap on the alt and PS pump.


Stock config.


New config.


Mounted the battery finally.


Picked up a new toy.


More full bump poser shots with the blinging pink D lines.

 

[Bart]

Diggin it. The right hand drive reminds me of my old single seater.

 

[Ashcat]

Single seat buggies with 4 banger, trans axle, Toyota/Samurai axles are gonna be runnin scared!

 

[YROC FAB.]

Diggin it. The right hand drive reminds me of my old single seater.

Picks? Thread?

 

[Bart]

No build thread but here are a couple of pics.

 

[YROC FAB.]

Its been warm so i keep getting distracted.

I mount the trans cooler tonight and fabbed my Tranny/tcase cover plate.









I forgot to take a good pick of it.

 

[YROC FAB.]

blap

 

[_Auzzy_]

Mmmm plasma work mmmm more tig!

 

[crosbike]

Im just going to stop fabbing now.

 

[YROC FAB.]

Im just going to start fapping now.

Awe thanks alex. When you going to bump your tread?

 

[crosbike]

Awe thanks alex. When you going to bump your tread?

after I finish up the 13 bolt and under the buggy again

 

[YROC FAB.]

after I finish up the 13 bolt and under the buggy again

So what like september?

 

[00xj36s]

Got this sucker running yet? What's taking so long!

 

[YROC FAB.]

Got this sucker running yet? What's taking so long!

No. Laziness mostly. I did fabrimicate/mount my steering reservoir this week.




I added some baffles inside. ^> these little ones keep the inlet tube from shooting fluid up where it can touch the air. it forces the fluid toward the outlet.



This baffle keeps outlet full of fluid if the buggy is side ways.






Im just using a radiator weld in bung and cap for the fill.









I had to track down a fitting to convert the 16MM O ring fitting in the P pump to convert it to JIC -6. I found one thru poly performance. As far as i can tell only PSC makes such an adapter. http://www.polyperformance.com/PSC-16MM-18MM-x-6-JIC-Adapter?quantity=1&multi318=15097&multi=17176

 

[_Auzzy_]

Well that ought do it

 

[YROC FAB.]

I got the steering plumbing complete, finished the intake tube elbow, fabbed the shifters for t case and mounted the tranny shifter.

 

[Coco]

Looking awesome man! Keep it up!