Here we go again........ Well it's been about 5 years since I did the last build and the Jeep has been awesome. I have been able to doing everything I have wanted to do with it, but it's time to go on to the next generation. I have purchased a buggy chassis and the plan is to use the parts off the Jeep to finish the buggy. Not sure I will get much more performance, but I have always wanted to build a buggy and I'm not getting any younger, so I guess now is the time. So here is the plan: Buggy chassis built by Factory Tubular (many years ago), but never built. When I purchased the chassis, it was a four seat, but after putting the tape measure to it, the shortest wheel base would have been 127", (Maybe why it never got built). So after looking at it for a few days, I decided to cut 21" out, which took out the rear seat, so it is now a two seat and should be around 110 to 113" when done. I have purchased a 05 5.3 L33 HO motor from BD Turnkey and planning on using my TH350 and Atlas out of the Jeep. I will also be using the D60 and 14 Bolt as well. The Coil Overs will be placed in storage why I give a set of ORI Struts a try. Then there will be just small things coming out of the Jeep like, radiator, steering, fuel cell, tires and wheels, gate shifter, etc.... The plan is around 6 months if all goes well, but there is allot of work. I will get some pics up soon once I get started.