Search results

First up we have a pair of 14"x2.5" KING coilovers. Used very little and just a little dusty from sitting on the shelf for a couple years. These were used for just a handful of outings and they are in great shape. The coils are 16-400/14-300. These are $1300 a pair new. Get this slightly used...

I got these a while back but have never run them because I decided to go a different route with my project. They show some wear and there are some marks on the body that have been polished by the previous owner. The rod ends have very little play if any. The anodize has some fading but like...

Selling these for my pops. He had some money burning a whole in his pocket so he got new wheels and tires. I believe these are 2008 Xterra wheels(I'll double check the year) The tires have some uneven wear and maybe 35% tread and the wheels are in good shape. Just a little dirty but still nice...

sold sold

So for all the tweeners that think a homebuild in the firearm section is anything but a homebuilt firearm... Yeah I guess I can't say how dumb that is without getting banned so I'll try again. I was posting the first thread trying to see if there were any people that built their own guns. I...

These were mounted but I don't think the vehicle ever moved from the shop. I decided to go with 15" wheels so these are not doing anybody much good in my garage...

I am looking for some leafs from an f150 anywhere from the 80s-90s. 2wd might be best but I am interested in 4x4 or 2wd. I should be able to use the leafs from most any f150 from the TTB era. Txt is best or leave a message, 801 six94 five82five-Chadwick

I have a fun little Bulgarian project and long story short I have about 6" of 5.45 caliber barrel. I'm thinking of either making a simple single shot pistol or a pistol that uses a magazine. Whatever I make would most likely be .22lr because the bore is close enough and it would require less...

Two 1" CNC master cylinders with hardly any use. They have been sitting for about 2 years $40 pics tomorrow Ruffstuff 7/8" heims with stainless 3/4" misalighnments and weld in bungs made for 1.5"id tubing (I used heims the same size for lower arms on my xj and I might have bushing material if...

I had this on my truck way back when. It needs a little cleaning but it worked good. It did help my poor 2.8 run better and would work well with other upgrades. Should fit all chevy/gmc 2.8 tbi trucks and suvs. $30 txt is best or leave a voicemail 801six 94 five 82 five Chadwick

I just stepped up to 35s and have no plans of going back down so my tires and wheels are for sale. Better pics and info tonight. About 50% tread and the wheels have either 3.5" or 3.75" backspace. One tire had a plug and has not leaked since and the others don't have any plugs that I know of...

I am planning a part for my truck that will use the ttb Dana 35 parts. I would need the bolt on snouts, the hubs( just the bearing housing area I don't need the 4wd stuff) and possibly the rotors. Let me know of you have something left over from a d44 swap or solid axle swap. I expect to pay...

$30 I ended up not using these but I did use bolts and the top spring plate so I am only selling the lower plate. You would just need bolts and a top spring plate from ruffstuff or I can burn some out for an extra couple bucks...

Owners Name & City- Chadwick from West Bountiful, Utah Make, Model & Year of Vehicle- Ford Ranger 2003 Engine- 4.0 sohc v6 Transmission-5 speed manual T-Case-N/A Axle- Explorer 8.8, 4.10 gears, spartan locker Suspension- One-off dual a-arm design using a fabricated...

About 125k 3.55 gears and an open diff. One brake drum is good and one has a chip off the edge and might need to be replaced. The dif cover needs to have a hole plugged. Don't let the paint fool you. I got a new axle from the junk yard and used my old diff cover so the junk yard punched a hole...

SOLD EASTWOOD 200AMP TIG WELDER Sold I got this brand new about a year or so ago and I it has been great. I honestly think I have less than 10 hours use on it. This machine works great for steel/stainless and aluminium. Very good for delicate work. I paid $800 for it but sadly with our house...

Posting for my parents, located in Levan Utah, call Pam for more info 801 913 8848 $750

posting these for my parents. Random parts located on Levan, call Pam for more info and pricing 801 913 8848

This pair of FOA shocks are a couple years old and have been sitting for about 1 year. The valving is unknown and the seals seam to be fine. The bodies have some corrosion and the shafts look really good. These do not come with the pin adaptors, but they will come with extra misalighnments. $225...

3.4 V6 FROM A 94 TOYOTA PICKUP FOR SALE! The history: I swapped this engine in my 94 toyota desert race truck about 3 years ago. I used a sorry excuse for a human being to make a harness that I had to rewire instantly (not super pretty). The computer and wiring has worked fine after about...