Search results

I just bought a 96 Grand Cherokee and was wondering if anyone made a fender flare for it. It is going to be lifted in the next week or two. Thanks Tony

Just got back from another run up Mona Pole. Almost all of the snow is melted now. I followed some of my friends up on 4-wheelers. Only ran into 3 jeeps that were just starting up when we got down. No other vehicles up there besides 4-wheelers. It is a really nice, easy trail just to get out...

I took a quick run up Mona Pole today. Was a nice Sunday drive. Weather was nice up there, not to hot. The trail is all cleared except for one spot there is still a big snow drift with a fallen tree on top of it. I only ran up to the mine, so I dont know how the rest of the road is. The road to...

I need to move my gun safe downstairs. Any one ever done this? I really dont want to move it, but thats where it needs to go. There are 7 stairs and not alot of room at the top to manuver it. Any ideas?

Had a blast down there. Ran Gold bar rim over then over to golden crack on Friday, Then Hells revenge on Saturday. Rolled in the big hot tub and bent a leaf. I will post more pics tomorrow

I rolled in the hot tub saturday and bent a rear leaf. i have spares but the only rear i have is out of a newer cruiser with the bigger shackle bolts and bushings. can i modify a front pack to work or just use the two main leafs off a front and the rest of a rear pack?

Had a fun time out there, even if i didnt get there until 3. My friend busted a Dana 60 outer right before i got there, The i broke a profield that in return stripped some splines off my 4340 inner. :(

Had a blast saturday. It was the first real wheeling I have done since I started this build on my cruiser. Everything was working good for the first few hours, then I lost my power steering pump pulley. The lip of it actually shattered and let the belt fall off. It was really slick on most of...

Not really 4x4 related, but it is in a 6x6 Freightliner tractor. It is a M916A1 military tractor. The turn signals come on but do not flash, I cannot find a flasher anywhere on it or in the manuals. The wiring schematic really sucks, it has most of it but it is broken down into little sections...

Does anyone on here have the bendtech ez 3d software? I won a copy on pirate and just got it. It rocks, You just type in all your measurements and it tells you how long of a piece you need, where to start each bend, how many degrees to bend and/or rotate, and how much each piece weighs...

Especially when you are in a hazardous materials course that you will almost never have to deal with. I am stuck here for 2 weeks in a military school that I found out I was going to 2 weeks ago. This is the hardest school I have ever been to, military or not. Maybe I am just not use to dealing...

I was in Little Rock the last couple weeks for a school and made it out to the Bronco Roundup at the Superlift ORV park in Hot Springs. I met up with Dan Dibble and his friends who let me ride along with them on some trails. It was one of the best wheeling trips I have been on even if I didnt...

I had my cruiser down at my work to rewire it, while I was there I decided to play on the forklift for a few minutes. Pics arent great, they were off my phone.

I finally got my new guage and switch panels made.

What is the best way to make sure that my welds dont leak when i mount my tires on them. I have been told to put a layer of rtv around the weld after I get the back bead mounted. Will this work or is there a better way? I really dont want to get them mounted then find out they leak. Tony

I just put the rear brakeline on and pulled it out of my garage for the first time in a couple months.

My father-in-laws transmission went out on his 1990 Dodge Dakota yesterday. It is a manual tranny. Where are some good places to get it rebuilt or get a new one?

Where is the best place around to get a new driveline made? I put my rear axle under yesterday and discovered my stock driveline wouldnt work anymore. I need a cv coming off of the transfer.

Finally found my camera tonight. The pictures arent too great, I had to enhance the colors so you could see them.

Where is the best place to get an orbital valve from? I have a 2x8 single ended cylinder so I think I want the Char-Lynn 211-1010-002 from what I have read. Any valve with similar specs would work though, I assume. Thanks Tony