Search results

I've been out of the world for a little while and I'm looking for advice for a later model (something like 2014 or later) v6 engine of some sort to put into a Toyota pickup, 1990 extra cab. I was planning on a Gen V all aluminum 4.3L from a 1500 Silverado, but I'm having a hell of a time...

Hi all, I'm learning about Dana parts etc now that I've had this Jeepster for 3 years. I love it. I've mostly been a Toyota guy. I had a poor idea and nearly sold it a month ago (you might have seen it on KSL) and luckily the sale didn't go through as I'm ecstatic to keep this Jeepster and...

I'm super bummed that Henderson sold their car parts business to NAPA. They were the super cheap brake rotor source in SLC! I need some new brakes for our 04 E350 van. Anyone have any recommendations on where to get? Seem to be about $80 anywhere I look. I don't think I ever paid more...

Subject says it all.. Looking for ideally an AC/DC machine but may consider a DC only machine if it is reasonably priced. Trying to keep it under $1k if possible because the machine will be used so seldom. I am aware of the cheap Chinese models but would prefer a big 3 model that is used...

I have a well built FJ40 that I'm asking $8800 for but am open to offers on. I may also be able to work something out on delivery to most cities in the west. Full description and photos here: http://andreshoumatoff.smugmug.com/Cars/Built-1966-FJ40 It runs and drives well and has maybe...

I have a very lightly used Warn 8274 winch. It was spooled out used only once, and it was on a bumper in summer time for only 2 months, looks / appears / works brand new. I have a Ford camper van I'm building so I'm looking for a 10K / 12K or even a 15K winch instead of this 8274. So I'm...

Hi guys, We are CC'd on the road reports from Grand Staircase so we'll post them as they come in. Keep in mind that these vary according to the weather conditions. AKA slow in the winter and summer unless there is a major road event. These also generally are tailored to stockish vehicles but...

Looking for a used but good shape chain saw Husqvarna or Stihl 18" to 24" blade or so, ideally 45cc or preferably larger, looking to spend $150 to $250 or so but will pay for a good deal. Thanks!

SOLD SOLD SOLD Brand new. This lets you bolt a Chevy pattern V8 to Toyota V6 or turbo R151 or R150 transmission. This includes bellhousing, clutch fork, and the extra $200 clutch disk. There is nothing wrong with it, just went a different direction. The clutch disk is a 21 spline custom...

These are powdercoated Marlin Crawler sliders that are gorgeous and ready to go. Color is a greyish matte color that has a little brown in it. Decided to go a different custom route, $200 firm. Weld on and all setup to put these on your truck in no time at all. Only good, in my opinion, for...

SOLD Subject says it all. Brand new, in box, Advance Adapters bellhousing adapter with clutch fork, and the custom clutch disk that is the GM 10.5"/11" disk with a Toyota spline.. All you need is a regular GM clutch kit to complete the kit and install a V8 to a Toyota 5 speed. This is for the...

SOLD Powerstroke 7.3 Injector, Glow Plugs, & HPOP ('99 to '03.5)) ****All parts sold**** After breaking down in Fernley Nevada once because of an injector I think everyone with a 7.3 should carry a spare injector at least on any road trip... It turned a $800 job into 5 minutes and $0...

Just stuff lying around that isn't much more use to me. Honestly just make an offer if you want. V6 IFS calipers - $20? V6 3.0 distributor, ignitor/coil combo, $10 for both? I live in Park City and work in downtown SLC. Not willing to drive to meet you, you must meet me. thanks

Subject basically says it all. Not too odd a list I suppose. For an engine swap I need to wire up custom alternator and starter cables pretty much... I know electrical supplies are all over the place. Do people have recommendations on an electrical supply that could be considered similar to...

Probably a question I could ask Carl directly maybe as I remember comment about this when he was pulling my engine... Subject basically says it all... I stupidly forgot to pull the water temp and oil pressure senders from the 3.0 from 1991 Pickup before I sold the engine. I am putting a...

I need probably about 3' only of some sort of reasonable thick wall (like 3/16s or so I'd say) something like 1.5" or 1.25" ID DOM. Doesn't need to be chromoly mild steel is fine.. The only reason I ask is I got fawked at Metal Supermarket last time but they also cut and sold me the wrong...

What is exactly going on with this... I guess he crashed his car into a fire hydrant and tree outside his house. His wife was in the car? What exactly happened.. I guess there are some rumors of infidelity and that his wife was possibly beating the crap out of him while he was driving...

EDIT - Time and date will be: Utah Concealed Firearm Permit Class Course Price: $40 with online pre-registration Course Times: 6:00 PM to 9:00 PM. Date: Tuesday, December 08, 2009 Location: Murray High School 5440 South State St. Murray, UT 84107 Price: $40.00 (online pre-register price)...

I thought this was pretty funny. I just ordered up a fleece for $60 that reads "the south butt" - right on to this kid. The best part is I wouldn't have known about it if they didn't sue and word didn't get out... Nothing against The North Face but that is just retarded if you ask me...

Hi guys, I'm considering throwing in the towel in on a new-to-me 2000 Power Stroke. First problem was a massive oil leak I developed in the HPOP housing (that is fixed now). Second was a bolt broken off in the head that keeps one of the injectors down. The solution for that: I replaced the...