Search results

On my Bronco and now my Jeep I have been running 3/8 rubber air hose for my OBA. Years ago I got some Goodyear 3/8 that held up great, some of it was used on the Bronco and then transferred to the Jeep when the Jeep was built up. A few years ago I had a line rupture, it was near the exhaust...

Mishimoto designed a new radiator for the XJ, it has 90% more capacity than the stock XJ one. Here is an article about the design; https://www.mishimoto.com/engineering/2017/07/jeep-xj-cherokee-radiator-part-1/ My 1999 XJ is so modified that I can't ever seem to put a part in without modifying...

I am getting ready to rebuild my AX-15, it runs fine other than clunky shifts. It is from a 1999 XJ. I keep coming across this "5th gear update kit" it is about $80.00 What problem does this kit solve? Should I install it when I rebuild this transmission? I can't find any...

Is anyone going to be in Moab wheeling on October 21st and 22nd? We are going down there and would like to run trails with a group. We have a really heavy XJ on 1 ton's and 37's but enjoy doing mild trails too. Thanks Nathan

I have a pair of old style Goodyear MTR's sitting around they are mounted on GM 8 lug wheels. Date codes are "2108" and "3507" The newer one has slightly more tread. Tread and side walls are in pretty good shape. $50 takes the pair, I don't need the wheels but I can get them un-mounted...

So after fixing my exhaust issues I got my Jeep dyno'ed again. (I will post up more info about that in my build thread soon) Anyway Joe at Turbo Lab says that if there were a way to advance my timing 4 degrees the engine would run much better. (his exact words were "15 to 30 hp and lower...

This company is restoring and building XJ's I don't think I have seen anything like that for XJ's. So if you want a nice reliable built XJ put in an order. Anything from restored with mild lift to a LS and coil overs... http://davisautosports.com/custom-build-cheorkee Nathan

I am not sure if this has been talked about or not https://www.youtube.com/watch?v=I6H5dM-hxdU Looks like Cummins is looking into a diesel conversion for tj's. It is not a 4bt. The video is kind of annoying, basically they prove that a diesel engine gets better gas mileage than a 4.0...

**** Everything is SOLD **** Behemoth Shorty/Dana 300 $1350. I am selling a Behemoth Shorty attached to a Dana 300 with a rear driveshaft and one cable that could be used to shift the Behemoth. $1350 OBO for everything. Behemoth/Jacob went away a while ago, the main issue people had with...

So my wife was driving home today and hit a bump and said it felt like a Death Wobble, she had to slow down for it to quit. The xj then spewed power steering fluid everywhere, the return line coming off the steering box has a hose clamp holding the hose to the line, this hose came off (spraying...

I didn't see this posted up here yet; http://www.autoblog.com/2016/05/18/2018-jeep-wrangler-unlimited-spy-photos-best-look-yet/ It has the blankets on it so you can't really see it, but it looks a lot like a JK. There is still so much speculation, but one thing is for sure, Jeep will sell...

I am selling a Behemoth Shorty attached to a Dana 300 with a rear driveshaft and one cable that could be used to shift the Behemoth. $1350 OBO for everything. Behemoth/Jacob went away a while ago, the main issue people had with him is that he could never deliver products on time. It is...

I haven't been on Gold Bar Rim in about 4 years, everything in Moab has gotten more dugout. I looked at the RR4W trail description it seems the the same as it has been, 33's one locker. Is there a winch point at the top of the waterfall? I am pretty sure there was not last time I did the...

****Sold***** $450.00 OBO Engine has 205,000 miles Compression test is; #1 125, #2 130, #3 125, #4 125, #5 125, #6 130 The engine still runs great. For the last 70,000 miles it has had Mobil 1 oil in it that was changed every 4000 miles or 6 months. (the last few years I changed it in the...

Ok so yeah you can just cut the handle off a flat head screwdriver and stick it in a drill, but since I am still waiting on the machine work on my cylinder head I had some time to make something a little nicer. So when you are building a fresh motor you want to prime the oil pump and system...

So I have virtually no clearance between my exhaust down tube and my oil pan. And the Down tube is self clearancing on my front DS yoke I know that the oil pickup is closer to the front of the sump than the rear of the sump. I was thinking that ideally I could have that corner taken in about...

If this should be moved to tow rigs, go ahead and move it. I am mainly putting this here so that it may help someone else out there, hopefully it comes up in the first few pages of their google search. I have a 2007 Ford F350 Superduty with a V10 and a 6speed manual, 135,000 miles on it. My...

My Father in law has 2001 TJ with 33 inch tires, a 1 inch body lift and 2 inch spring spacer lift. He wanted to go a little slower and came across the ultimate un-seen trail bling; The Behemoth D300 Shortie box. http://www.behemothdrivetrain.com/STRONG_BOX_UNDERDRIVE_KITS.html So lets just...

I came out of work today and had a nice spot on my hood that the clear coat had bubbled up. I have some bubbles on the roof but you don't really look at the roof on a full size truck. Are there any good DIY clear coat repair methods? The only reason this bothers me is that it is staring at...

So before my last moab trip the speedomoter randomly read 0 while going about 55mph. I figured that for some reason the pinion gear was not touching the drive gear so I dinked around with the housing and got it working again, it worked for the moab trip. I got in the jeep the other day an no...