Search results

I've been drawing in CAD and plasma cutting a lot of different ornamental grill profiles for various 4x4's lately. The width is around 10". The thickness is 11 ga. The cost is $15-25 depending on how much steel used. I can do different styles, variations, and sizes too.

http://boise.craigslist.org/cto/4642188859.html Interesting concept. Pros? Cons?

Take your typical flatfender Jeep body and drivetrain and put it on this chassis for an improvement in strength and capability. The frame is boxed and lengthened to a 91" wheelbase. The wheelbase is the longest possible and still have the tires fully under the body. It is sprung under the...

4:1 ratio. 23 spline transmission input with 6 hole circular bolt pattern. 6 spline transfer case output with "Texas" bolt pattern adapter plate. It has never been run -- just sitting in my shop for years. $500. This is small enough and light enough that it could be shipped UPS. There are...

$500. The gear ratio is 5:1. It is a driver drop. The input is early Bronco 28 spl. The yokes are 1310 CV. The front output is the heavy-duty 32 spline upgrade. Teeth on the low range rear gears are chipped. See the photo. I ran it several months like this. It seems plenty strong, but makes a...

$2000. The package includes the axle, suspension, and steering. It is nearly a bolt-in for a TJ. Currently, it is 8 lug wheel pattern and 64" WMS. 1/2 ton outers will make it 5 on 5.5 or 6 on 5.5 and 62" WMS. axle specs: originally from a 3/4 ton Ford driver side drop high pinion 1/2" wall...

How much vertical separation at the axle and the frame do you have? More/Less Pros/Cons through whoops/climbing interpreting the anti-squat numbers that the infamous link calculator spits out This is for the FRONT not the rear suspension.

I have to eat crow on this. A while back I claimed the Atlas was strong enough for all but super heavy rigs and maybe Ultra 4. Well, my 5:1 Atlas has been making groaning and knocking sounds in 4LO when coasting. It's gotten worse over the past couple months. I pulled it and found broken...

http://youtu.be/ErjBPvwGUxQ http://youtu.be/To8aWXK1XuQ

Is anyone going to be at BFE or Sand Hollow next weekend? My neighbor is wrapping up the final touches on his buggy and wants to hit some slick-rock before starting a new contract on the east coast. We would love to connect up with a couple more buggies on or around that weekend.

What and where are these? I've heard them mentioned a few times. Would they be worth the drive from Boise?

Has anyone seen a big pressure drop with an engine oil cooler? I just plumbed in a cooler on my early Bronco with a 351w. Pressure at idle went from 40 PSI to 20 PSI. There are no obvious kinks or obstructions or plugs. The adapter puck between the block and filter lines up properly. It's...

http://www.breitbart.com/Breitbart-Texas/2014/04/21/The-Eyes-of-the-BLM-are-on-Texas Apparently, the BLM plans to take advantage of a border dispute between Texas and Oklahoma to claim 90,000 acres of river-bottom land. I'm not sure I fully understand the issue, but it appears that the river...

http://money.cnn.com/video/pf/2014/01/31/latt-skyrunner-flying-dune-buggy.cnnmoney/index.html?iid=V_Series

Does anyone know of 37-12.50R15 AT's (or very quiet MT's) that are still being made? It seems that this size is only being offered in a few aggressive MT's. How about for 17" rims? Anything with mild tread that you have experience with? Don't really want to buy new rims, but I'm tired of...

Quantity 5. The tread is 50-75%. Used exclusively for rock crawling so have sidewall cuts, gouges, etc. No plugs. No leaks. Nothing too worrisome but no guarantees. $800. Also consider trades +/- cash for a very nice set of 37-12.50R15 all terrains. Other stuff too.

Looking for a YJ hood.

I aw this on Craigslist. Has anyone done it? Is there any truth to it? Jeep 4.0 mileage increaser (5.0 injectors) - $1 (Meridian) I have a set of injectors with 37k miles on them. They came out of a 5.0 mustang and will fit a 4.0 jeep motor. The reason they increase mileage is because the...

Fiat will buy the UAW's stake in Chrysler, and Chrysler will become a wholy owned subsidiary of Fiat. Interestingly, Fiat is using the profits from Jeep sport-utes and Dodge trucks to prop up its failing European business units. All this courtesy of Obama's $12B bailout and his ripping up of...

I'm building a custom axle from this late-model ribbed housing. Specs: 60" WMS full float 5-5.5 bolt pattern disk brakes spool shave kit What do you guys think of the specs? What are your favorite parts suppliers for the 14 bolt? Any differences between the late and early units other than...