Search results

Anybody had a 34 dcge dumpfuel because it wanted a regulator? This is on a samurai, My secondary is pouring fuel in on its own spontaneously. Its even running rich at full throttle:( Anyone solve a similar problem on a different carb with a regulator?

My relatively new Weber 34-34 is dumping fuel from the secondary. so much that it maintains a puddle on top of the throttle plate when the secondary is closed. This carb is about 1.5 years old but is off-road-only and only has maybe 40 hours total use. Any suggestions as to what could be...

My fuel pump is going out on my samurai and I have a low pressure electric fuel pump to put on. I can wire the pump through a solenoid to turn off when the key is off but ... Problem:confused:: I don't want the thing to keep pumping gas after I roll down a hill and the motor stops running...

It appears that the cheepest way to dump the original samurai carb is a 34 DGEC. Kit around $250. Anyone using one? Any complaints about the jetting or factory setup on the kits? Also, how does it take steep climbs relative to a stock carb. Thanks

Thinking about doing providence canyon up to the logan peak on saturday morning. Should be a much nicer wether day than we have had in a while:). Anyone interested?

I bought a sami with a GM alternator, installed in a rather questionable manner but working fine until recently. Here's the problem, When I start my samurai it starts cooking the smaller wire coming from the battery (runs everything but the starter):(. The trick is that is only happens a...

My buddy just bought a 96 sidekick two door and is in the market for tires so I need to tap the vast power of the collective to find out how big he can go without rubbing. so What is the biggest tire size that will fit with stock wheels? Can you go bigger with a two inch body lift...

I will be building a custom trailer to tow my samurai. I haven't weighed it but it will be around 3k+ lbs loaded with mods and gear. Problem comes from the fact that I have a 98 rodeo (tow capacity of about 4500lbs) as a tow vehicle. Plan: Build my own trailer or pay for a custom build...

I saw a thread on changing to an off road vehicle licence a few months ago and I am not having any luck finding it again. Can anyone direct me to it? (the search function doesn't seem to be working) Thanks

Spencurai and I went to little moab to try out my new junk. I had just installed the track bar and lockrite in the back (front is welded). It fared well other than the cronic lousy carb that I am trying to fix. ended the the day with a hard flop on the passenger side that bend the windshield...

Owners Name & City- Marc (In good company) Ogden ut, Bro of a couple other current and past zuk users in the area Make, Model & Year of Vehicle- 88 tin top zuk Engine- 1.3 (-timing belt cover:confused: ) I think? it runs fairly well without any smoke so I don't complain...

My recently aquired Zuk has shock towers in the front. One shock is missing and the other is not working well. The upper has a bolt through the bushing but the shock can move almost half an inch with respect to the tower. Here's the questing what type of shock end do I want and what is...

Hello all, been gone for quite a while but then I bought a largely well-buildt hard top zuk and now I'm back. Question: with a sidekick rear axle and what I believe is a sidekick third member in the front, I am very happy about the grearing but the fact that the previous owner welded the...

WHat has everyone done to prepare for paint on bed liner? I am building some sliders out of bare steel and need to get the grease off. I am thinking right now of scotchbrite with Tide soap and then some mineral spirits. Is this good or do I need to rough it up with sand paper first. Also, is...

Delux and I have been doing a bit of welding as we are building bumpers and rocker protection. We are mostly buggering things up and I would like any suggestions from the tallented welders around. We are using a 230 amp max arc. Craftsman is the brand name. (the welder actualy belongs to...

Who makes the best XJ LCA's? I need some clearance so my 31's don't rub. :confused:

This is a question I have had for a long time. What does everyone do with antilock brakes when it comes time for brake line extensions? My xj has anti lock brakes and the associated hoses to the rear wheels. I am hesitant to simply plug up all the holes and be done with it. I know that's...

Ok Yota guys, I need some help. My sister in law had some ice issues in her 94ish 4runner and wound up tagging a nice new grand cherokee. She wasn't going too fast and was facing approximately strait ahead so when she hit, her tire that was turned left hit first. It didn't realy cause any...

This is kind of a stupid question but what is the biggest tire you can fit on a stock sami without rubbing? 225,235,30 9.50

I know this sounds stupid but I can't find anyone to sell me a 100 amp inline fuse for my power inverter/winch posative line. It makes me nervouse not haveing the thing fused close to the battery. If the insulation was breached it would be a fireworks show with 8 gage wire. Anyone...