Search results

I just bought a retired ambulance that I'm going to be converting to a 4x4 overland camper. I need to find somewhere to store it for a few months. I'm renting a condo and the ambo is not going to fit in the parking garage. If anybody has some space in their yard/driveway or warehouse/shop in...

I'm searching high and low for a company that does medium-duty 4x4 conversions in Utah or surrounding areas. I'm striking out so far. Hoping someone here can point me to a company that does this type of conversion/outfitting for med-duty or alternatively a custom fab shop that can do it...

Hi all. I'm planning out an onboard air setup with a tank under the bed, ARB dual compressor under hood, and lines running to a bulkhead/quick-coupler at the front and rear bumpers. I'm wondering what the best type of tubing, hose, fitting standard I should use. It would be nice to just use...

Greetings RME. I'm looking at designs for weld-on rock sliders and was wondering if running additional bracing between the main rail and the body mounts (the metal mounts, not the bolts or body itself) would make sense to make them stronger. I've seen bolt-on ones that use brackets held by the...

Looking for someone to weld on some rock sliders on my 2010 Taco Access Cab. These are the ones I'm looking at getting (with the Square and DOM options): https://www.4xinnovations.com/2005--2018-Access-Cab-Tacoma-Rock-Slider_p_73.html Alternatively, I'm open to having some fabricated locally...

I got my TBI running well, the timing is on, injectors flowing, new plugs, wires, cap/rotor etc. It revs smoothly and idles, but barely and at 200-300 RPM. I know the ECM controls the idle speed and that there's no manual adjustment without mods. I'm trying to understand how the ECM controls...

Wanted: Inspection cover (AKA flywheel cover, torque converter dust cover) for a TH700R4 4WD trans mated to a SBC. I think the trans is ~1991 if that makes a difference. thanks Edit: Also need the bolts or I could pick some up at the hardware store if anybody knows the size

I just installed a tow bar on my YJ and have never flat-towed a vehicle before, so I've looked all over the net trying to find solid info on how to do this while protecting the trans and t-case. What I'm finding is a lot of conflicting information (even Advance Adapters has conflicting info)...

383 sbc TBI using ~1991 350 donor ignition parts When using a timing light, I see several marks at once on the balancer instead of one clear mark. The balancer has only one actual mark on it, but when the engine is running, it looks like it has at least half a dozen marks showing up. I've...

I have two GM TBI injectors in need of cleaning/reconditioning. Could anybody point me to a service, preferably in Davis County or SLC area, that does the whole chemical/ultrasonic cleaning and spray testing thing? They are spraying in a conical formation, but also drizzling from the tip, so I...

I have a YJ with a performance chev 383 TBI. It's hot as hell under the hood, so I want to make some kind of cold-air-intake for it and am hoping to find an OEM airbox from some other truck to modify to fit. I'm heading out to pick n pull to pop some hoods and look and see what's out there...

Need a working headlight switch for a '90 YJ thanks

I have maybe 10 gallons of OLD gas in my YJ tank that I need to drain. Is there a trick to doing this without having to drop the tank? It has a GM TBI external fuel pump and I was wondering if it would be feasible to just disconnect the fuel output line and have the fuel pump do the work...

I have a '95 4runner with about 200K miles on the chassis. The rear seems to be sitting kinda low these days and it's also in need of shocks. Instead of replacing the shocks and rear springs with oem ones, I thought this might be a good time to put a mild lift on it. I don't think I'm ever...

I'm looking for a hardtop without doors for a '90 YJ, preferably black, but any color would be OK. Thanks Jason sbcjeep@gmail.com

I have a YJ with a Ford 9" rear axle. The axle has the two cables branching out to each drum. I will be fitting, under the YJ dash, an e-brake lever from a Toyota Pickup. I need to modify the Toyota cable to link up to the Ford couplings. I'm looking for an economical solution. I'm...

looking for an inexpensive tow to get my jeep from kaysville to Bountiful (Jeep not running). Does anybody have a towtruck who does side jobs or does anybody have a trailer that could haul it for a reasonable price? The Jeep has wide axles/tires, so it would need to be a wide trailer -- I...

I need some steel tubing and plate for bumpers and skids, etc. Last time I was at Wasatch, they wanted a lot of dough for rusty scrap. I'm on a tight budget and was hoping to find a scrap yard or something with some junk I could make use of for an inexpensive cost or free. Any Ideas or am I...

Does anybody know what size the fittings are on a '90 YJ power steering box? I've searched around and am not having much luck. Are they AN6, AN8? Other? I'm mounting a wide radiator, but the steering box lines are making the filler cap touch the hood. So, I need to re-route the...

I have too many engines and not enough stands and I need to quickly figure out a way to free up my hoist. I don't have time to order more stands/dollys, so I need to figure out something temporary until then. The engine is an old SBC block with heads and tin. I'm wondering if it's possible to...