Search results

Does anyone know of a place in Orem/ Provo that is a 4x4 friendly shop that can do a vehicle inspection. The truck was sold and the new owners are having a rough time getting anyone to look at the rig. It is legal, (Within specs), but people are just too chicken to actually inspect it to find...

Ok I am replacing the motor for my furnace blower and the replacement motor I was given is a 3 spd. The old one was a 1 spd. I was told it would work. The question I have is: I have 3 wires coming from the main control box that went to the old motor, Red, White and Black. The new motor has Red...

OK for some time now I have had issues with internet speed. I have an HP media center m270n it has upgraded ram I added another 512mb to the origional 512, it has hyper threading technology too. I have about 160G hard drive space, an External motorola Cable modem, a linksys 2.4ghz 802.11b...

OK so I want to mount a spindle unit for use on a swing out tire carrier. I have been told that the only way to do it is to mount it in a double shear method. (Brace the top and the bottom some how) The question is how. The Spindle unit can only be mounted to the bumper from the bottom. From...

I'm looking into getting some kind of cherokee, I have the Family thing happening soon.....but I'm not sure as to which to get, an XJ or a ZJ. it would be late 90's, what are the pros-cons to each? It would see some trail use but be mostly a DD and a weekend camping rig. It would end up getting...

Ok this is a small utility trailer maybe 4'x5'. more of a "haul stuff to the dump trailer" Once I had it loaded with rocks and was taking it to dump it and I felt my truck start to shake, I looked in the rear view mirror and the trailer was in what seemed like a very nasty death wobble...back...

How do I get something from forward air? Bud from Budbuilt is sending something to my friend through the SLC forward air terminal but neither of us know how to get it. please explain how forward air works. thanks

I'm not ready to go all out with a cage yet but I had an Idea that I want to run by more heads than my own..... a bed cage, which could be the start of something more but I really just want to have something that I can throw a canvas tarp over (like a can-back) for camping but have structural...

I made it for my CB and switches what do ya think? My head doesn't hit it unless I try to hit it. its made from 3/4" square tubing and 22ga steel sheeting

Let me know what you think.... Special thanks to Brian and Mike for all their help

shackle tube jigs.... for a toyota someone here in utah has to have a set I could borrow, I don't want to spend 30+ to buy them from allpro I have to get them soon so I can cut my frame for the shackle tubes. I need them so I can start my SAS.......PLEASE HELP ME FIND SOME!!!

Does anyone have any jigs for drilling the shackle tube holes that i could borrow. I'm getting ready for the sas.

I am thinking of putting a full size 14bolt ff in the rear of my toy. I would try to shave the housing for clearance and gear it aswell as lock it and go disk brakes. the question I have is..... will I have to change to an 8 lug rim or is there any way I can stick with my 6lugs ie change the...

I am going out west of Delta this weekend to do a little rock climbing/bouldering with some friends and was hoping I might find some decent wheeling out there for some fun when I am not climbing. Any one know of anything there?

I heard from a friend that the best way to use your Harbor freight tube bender without kinking the tube in tight bends is to fill it with sand and tape the ends. I haven't personally tried it but sounds like it would work real well.

I'm going out this saturday around noon anyone up for some wheeling??? I don't want to head out there alone so lets get some people out there!!! If not lil' moab then what about rattlesnake I've never been out there before.

I swaped in the v6 third with the spool on one night (2.5 hrs) then the next night I went to jeeptj38's shop and we were there from 9:00 pm till 3:00am making brakets for the 63" chevy swap as well as moving shocks and exhaust (so I could move the shocks to where I wanted them....on the cross...

I had a great time breaking in the new chevies and the v6 spool that I threw in just before the trip I hope these pics work. and a special thanks to Jeeptj38 for all his help at 3:00AM the day before I left. These are pics of Metal masher and the widow maker. I had to take the strap on the last...

Hey Guys I am moving this weekend from Orem up to Ogden, and want to find some local wheeling buddies so I dont go out of my mind. Where are the best places to go wheeling up there, I have heard of bartlet canyon (I think thats what its called) but thats about it. So Intro yourselves and lets go...

I'm looking to borrow a tube bender for a day or maybe be able to come over and use one. I want to bend some sliders and a rear bumper so me and "The Myth" can weld them together. I am in Orem so let me know who has what, that they would be willing to lend for a day or so. Thanks guys