Search results

60 bucks or trade for tj parts. Make me an offer. Thought it would fit on a tj Dana 30 but bolt pattern didn't quite line up. Sent from my SM-G935V using Tapatalk

Hey everyone I am working on my senior project for Mechanical Engineering. My project is to build a mass produced cheap powered light rack mechanism that would allow people to make their adjustable light rack into a powered from inside the cab adjustable light rack. The goal is for it to be...

Hi all, I've got an auburn Ected locker with what sounds like a common problem of it not disengaging. Only difference is that it sounds like most have problems with the D30 locker not disengaging but this is in TJ D44. I was up snow wheeling a couple weeks ago and it didnt disengage. Left...

Taking the family (including extended family) out to st george for spring break. Is there any maps to any of the trails? I only went down for winter on the rocks so im a little nervous about finding my way around!!! anybody got some gps cords? or advice? also looking for good...

I have a short in my brake/turn light. all three brakes lights work when i apply the brake but when i turn the right blinker on it flashes all three. If i turn my lights on it only flashes the third brake light and the right brake light. But when i put the left blinker on everything works...

So i have a tj Warn rear bumper that is tire carrier "ready" I dont want to pay more 300 bucks for nothing more than a "tire" holder. so... ive started building my own... i will post pics when i get my phone back (broke it last night) but i do/will have a few questions as i go. My first...

Hey all... Have a F-250 diesel with 6 inch lift and 37's and it is eating Tranny mounts...Any idea on what a cause may be? has any one else had this problem? When i say eating... i mean they are wearing out extremely quickly... replaced 3 within the last 3 months or so... any help would be great!

I just did a an axle swap about 4 weeks ago and about 2 weeks after driving the jeep my brakes started acting up. My pedal works fine and then an occasional stop the pedal goes all the way to the floor. I installed another d35 into the rear but had to swap the brakes over. Is it a coincidence...

First a little background knowledge-in moab now-i just finished a lot of mods right before leaving-I have a 97 tj that i put adjustable lowers and uppers track bar, new shocks all around( tera flex installed lowers and uppers), then i put a high pinion d30 with tj knuckles and a superior d35...

any one know if there is a fuse for the heater switch if so where is it at? or how to fix a heater that will only work full blast or on the lowest setting- nothing inbetween? my buddy had the same problem in his honda accord and it ended up being a fuse. any ideas will be greatly appreciated!

Ok here is the situation- ive got a buddy with a f 150 highboy (79 i believe) that he bought with intentions of using parts on it- but he has decided to go a different route and needing it gone- and i have been put in charge of parting it out. so here are my questions- what are the vital...

Hey guys-we've got a 2002 super duty that we use as our tow rig/recovery rig and just want some advice or ideas for new shocks. its got a 6 inch lift and 37's. What is the best option out there these days?

Well it was a fun filled weekend for our group but the fun left some faces in our group after the second trail. Pictures will tell it all. I just wanted to post a huge thank you to the guys and gals from Moab Friends For Wheelin/We Be Jeepin who help us turn the cherokee back over safely...

Sorry again for all the newbie questions but im trying to learn as much as i can while its all taken apart. So the question i have is that it is very difficult to shift. It is a five speed manual. a 97 tj. shifting into first at high rpms is very difficult, (i have to wait until i am almost...

Well i have gone from fixing a u joint, to replacing a drive line, to putting a slip yoke kit in to now replacing a transfer case! I was in the middle of installing the SYE only to find that once i dropped the t case, it has a crack in it! Does anybody know if i can weld it up? or have...

We just picked up a stealth road armor front bumper for our tower(f-250) and want opinions on which lights to put in it. Its got a 5-6 inch hole. so could fit either fives or six inch lights. Which lights should i get?

Tj battery Temp sensor Ive got a check engine light on in a 97 jeep tj and it is reading Ambient/Battery Temp Sensor input voltage too low. Anybody know what or where this is located? It wont clear the light till i fix it. Any help would be great! Thanks

I became a registered member at the convention this year, but not sure if it went through or not as i have recieved no sign of being a member. Is there some form of Email list that i can get on to know when the next project is, or meeting? or am i just supposed to just check on here and keep...

k, so im just trying to learn as much as i possibly can while i save up money to do what i want for my tj. My biggest question is, what are the pro's and con's of stretching a wheelbase on a tj? with that, should i stretch it? or leave it where it is at? I have a daily driver and a tow rig...

Does any one know if the poison spyder front stingers are street legal in utah? My fear would be that they are not wide enough, and the stinger itself blocks the lights but would really like to set my jeep up with one. Is it worth it? or does anyone recommend going a different direction.