Search results

Is there any out there that are consistant? I have std. ones, digital ones cheap slide ones, gauge style ones med. priced ones. None seem to give the same reading. Of all the std. slide style seem to be to most consistant between the three I have, but suck ass at low psi IMO. Slide style read...

Got a set from Bobby Long (Longfields) last week. They are pretty typical in the DIY lock department. Thing I liked about them over others is the inner ring sit inside the wheel lip and not on the outside edge, and it has a 1/4-3/8" ring around it to prevent the outer ring from coning in much...

Went a new park this weekend. Closest wheelin to me now, less than 2 hours. 250~ acres and it has been started, but plans are for a lot more I hear. What we hit in this short day didn't even come close to all the trails. Nothing great, but a good mix, and when it's wet, it's tough and MTR's...

I have a Toyota mini with 4" All Pro leafs in the rear and 5100 Bilsteins. Only thing out back is a gas tank and 100 pound "bed" and a cooler for weekend trips. I get a lot of hop on climbs and off camber they seem to unload real fast and it's gets tippy. I want it to hook up like it should...

Typed this once and the cable went out :mad: Here's the short short version Have some 37" MTRs on 8" steelies. Have a set of aluminum wheels I want to run instead though. Is it easy to mount tires on aluminum without damaging the rim to much? I've done it on stell ones, but that's a...

Anyone know the best place to get some 5.38's and a setup kit? Vonski? SukaB? Prefer a Dana Spicer set. Not looking for it right now, but plan to start building this pig sometime this winter and want to start lining up the parts. I'm just going to run stock shafts and weld it up before I go...

sent Skye some pics for the calender and he told me I should post this POS here :p Rigs like this are all over MO, AR, OK TX. This one just happens to be a cleaner version. It's running a 14B rear and 60 front. (least it's not the ever popular rockwell's) and some beadlocked 46" MT Claws :eek:

Picked this up this week. 95 4runner with 290K and a bad engine and near new 31's. Owner bought it for his sona nd he never checked the oil! They bought it last month from the original owner! :mad: Got all the maint. records of everything the orig. owner did to it as well I plan to either...

Okay, have the opportunity to pick up a real nice/clean 95 4unner with nearly 300K on it. Here's the deal on what my boss has done with it so far: So dose this sound like a worthwhile venture on a truck with 300K miles on the ticker? Thinking of keeping it for a DD for a short while or...

After getting a free hood in good shape (blue), new fenders (black), cowl and one door (white), and a red cab and other door I decided it was due for some paint. What cha think?

Shakedown run for me and I beat on it pretty well. Had a blast! Went to Disney this past weekend and met up with KS Toy off the POR board and another guy and his wife in an S10 Blazer. I was very happy with how my truck (Red POS) worked, nothing major came up. Here's some pics. I forgot my...

Need your help folks I need a few ASAP and the local parts monkey's are hopeless here. "did ya check the HELP section?" :rolleyes: I run Mog ES2233L and ES2234R and the boots are wasted. I even had them grab a rod end I use off the shelf, open the box, removed the boot and told them THIS IS...

Me and my friend have these and I'm using ES2233L and ES2234R tie rod ends on the tie rod. I've ran mine for a year and have had this problem since Igot them, and never done anything about it. Last night we bolted everything together for the final assembly on my friends Scout II. He noticed that...

Okay, for those that don't know, here's a brief rundown. 86 4runner (22RE), flopped it, now it's an 87 Xcab. Removed the 4runner harness and used all of it in the Xcab (minus the rear widow garbage). Thought I had everything nailed down (marked everything when I removed it), connected the...

I know you said you bought the AIM Top when I met you in SLC and said it was junk, and sold it and "made yours work" How did you make it work, any decent pics? I was going to chop mine off, cap the areas that needed to be done and wondered how the rest would be sealed without having to silicone...

Got some stuff done this weekend finally. Fuel tank relocated.

Swapping from the stock idiot sensor to the sending unit to run the gauges and this happened. Any clue on how to extract? It's pretty flush with the block and getting an EZ out in there will be tough. Very tight area there.

Where can I just buy a new set of these? I want the 6~ leaf 57"er's. I found three sets in the yards this weekend, all were in sad shape. I want this thing on the road ASAP, hook me up :p

Okay, tieing up a lot of the loose ends on my 86 4runner to 87 Xcab body swap and wonder what the laws are out there so I don't screw myself. Here in MO I'm supposed to take both my old 4runner title and VIN plates to the State Patrol along with the ones on the new donor cab along with a bill of...

I'm Chris, 30, married for 5 years, no kids, one dog and a cat. I'm a Civil Enginineering Tech and my wife is an RN. We are hoping to move to the SLC area this year if at all possible. Now to the good stuff....My ride: 86 4runner frame and an 87 Xcab swapped in it's place. More or less a...